Pipe welding positioner

1. Introduction

Automatic welding center is mainly composed of welding manipulator, welding rotator/ welding positioner and welding source. When working, the fist is to make piece on the welding rotator and turn welding rotator to make the work-piece stay to weld by process requirements. Then make welding torch adjust to a certain welding position through kinds of movement of welding manipulator. At the last, start welding machine and rotate work-piece by welding rotator to realize automatic welding.

2. Technical parameters

Model	Loading capacity	Rotary speed	Tilt degree	Worktable size	Motor
Model	Loading capacity	Rotary speed	Tilt degree	Worktable size	Rotary	Tilt
WP-1	1tons	0.05-0.5rpm	0-120°	Φ1200mm	1.1kw	1.5kw
WP-2	2tons	0.05-0.5rpm	0-120°	Φ1400mm	1.1kw	1.5kw
WP-3	3tons	0.05-0.5rpm	0-120°	Φ1400mm	1.5kw	2.2kw
WP-5	5tons	0.05-0.5rpm	0-120°	Φ1500mm	2.2kw	3kw
WP-10	10tons	0.02-0.2rpm	0-120°	Φ2000mm	3kw	5.5kw
WP-15	15tons	0.015-0.15rpm	0-120°	Φ2200mm	3kw	5.5kw
WP-20	20tons	0.015-0.15rpm	0-120°	Φ2300mm	4kw	7.5kw
WP-30	30tons	0.015-0.15rpm	0-120°	Φ2500mm	7.5kw	11kw
WP-40	40tons	0.015-0.15rpm	0-120°	Φ2500mm	11kw	11kw
WP-50	50tons	0.015-0.15rpm	0-120°	Φ3000mm	11kw	15kw
WP-100	100tons	0.015-0.15rpm	0-120°	Φ4000mm	15kw	18.5kw

Scan and view on your phone

PHJ-15/ 18 H beam 3 in 1 welding machine

BXS-1530 Portable type plasma flame cutting machine

Tank longitudinal seam welding machine

Pipe welding positioner