Pipe welding rotator/ Welding turning roller (conventional type)

1. Introduction

CWR series conventional welding rotator is used for metal cylinder, pipe or tank automatic girth and longitudinal seam welding. It is composed of power welding rotator and idler welding rotator, and the welding rotator space can be adjusted by bolt or screw. It has the features of reliable quality, good performance, easy operation and wide application.

2. Technical parameters

Model	Loading capacity	Pipe diameter range	Roller dimension		Motor
Model	Loading capacity	Pipe diameter range	Rubber roller	Metal roller	Motor
CWR-5	5tons	Φ250-2300mm	Φ250*100mm	2Φ24020mm	2*0.37kw
CWR-10	10tons	Φ320-2800mm	Φ300*120mm	2Φ29025mm	2*0.55kw
CWR-20	20tons	Φ500-3500mm	Φ350*120mm	2Φ34030mm	2*1.1kw
CWR-40	40tons	Φ600-4200mm	Φ400*120mm	2Φ39040mm	2*1.5kw
CWR-60	60tons	Φ700-5000mm	Φ450*120mm	2Φ44050mm	2*2.2kw
CWR-80	80tons	Φ700-5500mm	Φ500*120mm	2Φ49060mm	2*3kw
CWR-100	100tons	Φ700-6000mm	Φ500*120mm	2Φ49080mm	2*3kw
CWR-150	150tons	Φ1000-6000mm	/	Φ500*260mm	2*4kw
CWR-250	250tons	Φ1000-7500mm	/	Φ660*260mm	2*5.5kw
CWR-400	400tons	Φ1000-7500mm	/	Φ700*300mm	2*5.5kw
CWR-500	500tons	Φ1000-8000mm	/	Φ800*350mm	2*7.5kw
CWR-600	600tons	Φ1500-8500mm	/	Φ850*360mm	2*7.5kw
CWR-800	800tons	Φ1500-9000mm	/	Φ900*380mm	2*11kw
CWR-1000	1000tons	Φ1500-10000mm	/	Φ1000*350mm	2*15kw
CWR-1200	1200tons	Φ1500-12000mm	/	Φ1000*450mm	2*15kw

Scan and view on your phone

Membrane pipe-panel bending machine

Pipe welding positioner

PHJ-15/ 18 H beam 3 in 1 welding machine

Membrane pipe-panel welding machine