-
Mobile version
Sweep with your mobile phone
- Member Center
1. Principle and usage
Put the web plate and flange plate on the clamp worktable, hydraulic clamping system will clamp web and flange plate till the seam welding part can do spot welding. Worktable level for web plate keeps the same, ensure welding height is on the same level.It will through different sub-plateto hold web plate and ensure will stay in the middle of different flange plate.
2. Technical parameters
No. | Item | Specification |
1 | Dimension | 13200*1830*1530mm |
2 | Effectivewidth | 200-700mm (if less then 550mm width then use block to support) |
3 | Effective length | Within 12000mm |
4 | Maximumpressure | ≤15MPs |
5 | Hydraulic oiltype | 46# |
6 | Hydraulic clamper quantity | 20 units |
7 | Hydraulic lifting rollers | 8 pcs |
8 | Frame type web press device | 1 pc, air cylinder press and manual movement |
3. Configuration list
No. | Item | Note |
1 | Oil pump model | Gear pump |
2 | Oilpump discharge capacity | 10ML |
3 | Motorbrand | Great wall |
4 | Motor model | Y132M-4 |
5 | Motor power | 5.5KW |
6 | Selector valvemodel | 34SM-L10H-T |
7 | Oil pumpmodel | HSG63 |
8 | Welding method | Manualtype spot welding (buyer provide Co2 welder) |
9 | Cylinder control method | Separatelycontrol |
10 | Web adjust method | Through sub-plate to fit flangeheight |
Long press the screen to identify the QR code
Open the phone to scan QR code
友情链接:
济南鑫三达塑管熔接设备有限公司
